The stent is manufactured by means of laser cutting in metallic tubes with subsequent surface treatment in order to give it smooth and sleek finishing. The structure of the stent is based on the axial connection of cells with links producing different longitudinal configurations. Furthermore, adjusting radial cells allows to expand the stent to different diameters.

The stent delivery system consists of a rapid-exchange balloon catheter. The catheter comprises an inflatable balloon at the distal part.

There are two Xray markers indicate the position of the catheter, providing an excellent opportunity for visual control during X-ray imaging.

The catheter is covered with a durable hydrophilic Hydrax coating to
lubricate the catheter so that it could navigate through arteries.

coronary stent pre-mounted on a delivery system is an open-cell design stent made from Cobalt Chromium L605 alloy.



— Catheter useful length: 142 cm
— Average inflation time: 3-7 s
— Nominal burst pressure: 16 atm
— Nominal pressure: 11 atm
— Compatible with guidewire: 0,014"
— Compatible with guiding catheter minimum: 5F
— Markers material: Pt-Ir
Balanced stent thickness → balance of radial stiffness and flexibility
Stent inner diameter: 2,00 – 4,50 mm
Stent length: 8 - 40 mm
142 мм
0.014” / 0.36 мм
2.4 F
(0.79 мм)
2.6 F
(0.87 мм)
2.6 F
(0.86 мм)
2.0 F
(0.67 мм)
8 (800) 222-13-13
Коронарный стент NA SH
Стенты коронарные кобальт-хромовые NA SH на системе доставки
Длина баллона(мм)
Коронарный кобальт-хромовый NA SH на системе доставки, предназначены для имплантации в коронарную артерию или трансплантат из подкожной вены сердца для поддержания полостной проходимости сосуда и увеличения диаметра просвета.